| Gallery, Projects and General > The Design Shop |
| D1-4 Adapter |
| << < (3/5) > >> |
| DaveH:
Dave, Thanks for your kind words. :beer: DaveH |
| Davo J:
--- Quote from: DaveH on August 21, 2011, 09:34:23 PM ---Dave, Thanks for your kind words. :beer: DaveH --- End quote --- They are well deserve. :beer: I cut 3 slices off a 140mm round bar a while back, that are still waiting to be turned into D1-4 adapters. I have only had the bar for 3-4 years so they are progressing. LOL I don't really need them as I have a sub plate to bolt my chuck to the rotary table, but it will make things quicker. I see you posted on the HSM about having trouble contacting someone here, did you get it fixed? Paul The receiver will need holes around 40mm deep as the pins on the chuck are around 35mm, so just check the adapter is not going to hang out to far. With the new info/links you have above, are there any measurements are you having trouble getting? Let me know and I will chase them up for you. Dave |
| DaveH:
Dave, --- Quote from: Davo J on August 21, 2011, 11:37:13 PM ---I see you posted on the HSM about having trouble contacting someone here, did you get it fixed? Dave --- End quote --- You may have me confused with someone else, I am not a member of HSM, so never posted. Anyway 'tis best to let them slices mature a bit before use :lol: :beer: DaveH |
| Swarfing:
Guys i just PM'd Bob to see if he can help with the details, in the mean time does anybody have a pic of the locking bolts in the nose itself? i see they themselves have a locking screw that comes in from the side. Just trying to get a mental picture now. What i shall do is build two one out of bright steel bar that have already that i can use later on a rotary table then build another out of harder stuff. Just ordered some pins for starters and see where we go from there if Bob comes back to me. Thanks Paul |
| DaveH:
Paul, Davo J reply #9 The link shows them. DaveH |
| Navigation |
| Message Index |
| Next page |
| Previous page |