Nemett 15cc 4 stroke engine

[-steves-]

Wow, gobsmacked, absolutely cracking job and it runs great too.   

Gotta say I did cringe watching the video when the arm went over the prop, seen SO many fingers and arms cut doing just that, fortunately, mine only the once.... 

Its amazing what some people on this site are capable of making, truely amazing stuff 

[wheeltapper]

Thanks 

Roy

[Fredbare]

I am new to this and admire the quality of the craftmanship. 

I also live in Norfolk (Fakenham), and wonder where you get your metal from?

John

[wheeltapper]

Hi John
thanks for the kind words

I get most of my stock from a place called Ace Metal Supplies.
they are on the A47 just outside the Norwich outer ring road. the address is
10 Morgan way
bowthorpe ind estate
norwich
nr5 9JJ.

tel 01603 731935. ask for Greg.

I also get aluminium from here
http://stores.eBay.co.UK/Aluminium-Droitwich?_rdc=1

and stainless, silver steel and phosphor bronze from here
http://www.metal2models.btinternet.co.uk/

hope this helps.

Roy.

[sbwhart]

Just read the thread through again thats a fine engine Roy

 

[Fredbare]

Thank you Roy for that, I will certainly visit Ace Metal Supplies, next time I am in Norwich.http://madmodder.net/Smileys/default/kaffeetrinker_2.gif

John

[wheeltapper]

John
it might be an idea to phone them first if you are after something in particular.
Its not a dedicated steel stockholder, its  part of an engineering firm called Denny Engineering.

if they haven't got what you're after they can probably get it.

Roy .