Author Topic: Flycutters. (Read 7560 times)

udimet · « **on:** July 23, 2011, 10:12:50 AM »

Hello all,
Just thought some of you would like to see a couple of flycutters that I made for a mate, The larger one uses a Walter "Novex" 25x25 Toolholder and the smaller uses a Sandvik Coromant12x12.
When used with uncoated positive inserts they give a superbly smooth uniform finish with very low cutting forces and virtually no "Spindle hammer" I have tested the larger 1 at up to 0.70mm depth of cut and it still remains very easy on the machine. Change to coated positive inserts and the finish becomes mirror like [due to the CVD/PVD coating decreasing the sharpness of the cutting edge. but forces still remain very low.
The bodies are machined from EN24T [4340 in the US of A] and the ISO 30 arbor is from EN16T [not sure of the AISI number for it].
Regards,
Udimet.

udimet · « **Reply #1 on:** July 23, 2011, 10:17:27 AM »

Sorry, I forgot to mention that the bodies are interchangeable with the arbor.
Udimet.

saw · « **Reply #2 on:** July 24, 2011, 04:49:18 PM »

It's very hard to see your'e item when you have such a bigg photo. You will be a winner if you make the picture smaller.

DaveH · « **Reply #3 on:** July 24, 2011, 05:03:51 PM »

I second Saw,........ 640 x 480 is a nice size.

Sorry to be a grumpy ol' so & so

DaveH

udimet · « **Reply #4 on:** July 25, 2011, 09:15:47 AM »

Sorry about that Saw and DaveH, I am not to clued up on photo sizes, could anyone tell me the best way to reduce any future picture sizes?
Regards,
Udimet.

DaveH · « **Reply #5 on:** July 25, 2011, 09:30:30 AM »

Udimet,
I was hoping you wouldn't ask

I'm pretty useless when it comes to computers and programmes.

So here's my bit - The programme that came with the camera has an "Export" (thing) I just export it to my desktop as a 640 x 480 size.

Or another way is to Email the photo - again from the camera software. My software puts it in an attachment in an Email. I copy it (the attachment) to my desktop.

Thats my way - cause it is nice and simple - and I like simple, goes well with me

DaveH

udimet · « **Reply #6 on:** July 25, 2011, 09:38:44 AM »

Thanks DaveH, I will check it out.

HS93 · « **Reply #7 on:** July 25, 2011, 09:42:18 AM »

try this I have used it for some time dead easy

http://bluefive.pair.com/pixresizer.htm

Peter

udimet · « **Reply #8 on:** July 25, 2011, 10:01:52 AM »

Thanks boys, I have found out how to resize them after I have downloaded them from the camera so, if ever I upload a photo to the forum I will know how to do it. many thanks,
Regards,
Udimet.

saw · « **Reply #9 on:** July 25, 2011, 10:56:38 AM »

Of course you will upload more photo, do not be afraid of my comment, I did it just for the best for us all.
Best wiches from Sweden.

MadModder

News: