MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Check out the latest projects here:
Project Logs
Home
Help
Search
Login
Register
MadModder
»
The Shop
»
Composites & Plastics
»
Diamond knurling Nylon 66 /PA 66?
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Diamond knurling Nylon 66 /PA 66? (Read 12142 times)
bry1975
Sr. Member
Posts: 417
Country:
Diamond knurling Nylon 66 /PA 66?
«
on:
July 16, 2011, 02:23:51 PM »
Chaps,
So have any of you diamond knurled PA66?
Or as a college friend use to say KKK nurl.
TIA
Bry
Logged
Jasonb
Sr. Member
Posts: 451
Country:
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #1 on:
July 16, 2011, 03:14:40 PM »
Would have thought you will need to use a cut type knurling tool for that.
J
Logged
Stilldrillin
Global Moderator
Hero Member
Posts: 4972
Country:
Staveley, Derbyshire. England.
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #2 on:
July 16, 2011, 03:48:52 PM »
I tried, on some delrin.
Produced a light pattern, only. But sufficient for my purpose at the time.
David D
Logged
David.
Still drilling holes... Sometimes, in the right place!
Still modifying bits of metal... Occasionally, making an improvement!
John Stevenson
In Memoriam
Hero Member
Posts: 1643
Nottingham, England.
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #3 on:
July 16, 2011, 04:51:29 PM »
I personally haven't done any but the aerospace company up the road pop in and borrow my cut knurler every so often to run some nylon parts.
They reckon it works OK.
John S.
Logged
John Stevenson
bry1975
Sr. Member
Posts: 417
Country:
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #4 on:
July 16, 2011, 05:03:51 PM »
Thanks chaps,
I wonder can plastic be given a pebble finish by blasting or tumbling? Gonna have to look into that.
Logged
Jonny
Hero Member
Posts: 780
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #5 on:
July 16, 2011, 05:17:06 PM »
Bead blasting most plastics will only come out matt.
To get any indentation courser media will have to be used.
Cut type knurlers work best on plastics, well on nylon 66 and delrin, but may have to settle for flat peaks.
Logged
bry1975
Sr. Member
Posts: 417
Country:
Re: Diamond knurling Nylon 66 /PA 66?
«
Reply #6 on:
July 16, 2011, 05:24:25 PM »
Thanks Jonny,
I wonder if I can run a tumbler of the centre lathe so a cylinder running eccentric?
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
The Shop
»
Composites & Plastics
»
Diamond knurling Nylon 66 /PA 66?