The Shop > Tools
A Tangential Toolholder for the Sherline
cedge:
Bernd
As long as he's specified the compounded angle the tool will work fine. 12°, 12° and a 30° tool rake is what seems the be the common consensus. You'll be pleasantly surprised the first time you cut with it.
Steve
Bernd:
Steve,
That's what I've read about it also. Rudy Kouhoupt was a great fan of that tool form. He liked it very much.
Once these holidays are out of the way and wife goes back to work I can get some shop time in and start working on my tangential toolholder. :)
Bernd
Bernd:
Well I made a prototype today. Looks like it might work. Need to finish it first before I build the next and record for a build thread. Want to make sure it works before I do that.
Ya I know :worthless:, but hang in there, it's coming soon to a PC near you. :D
Bernd
kellswaterri:
Hi all...spotted this on another site...might be useful...
http://www.gadgetbuilder.com/ToolHolders.html#Tangent
All the best for now,
John.
Darren:
Another one here http://home.hetnet.nl/~w_ermers/planned.html
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version