The Shop > Tools

A Tangential Toolholder for the Sherline

<< < (3/6) > >>

Bernd:
John,

I've seen that one. Great idea for a QCTP and simple to make.

Bernd

Bernd:
Ok, just to show I haven't totaly been goofing off. I've got the prototype tool holder done. I just need to make a tee nut and a tool clamp. Here's two pics with the cutter being held by a rubber band, just for show.  :)





Hopefuly I can get the two items I mentioned above finished by next week and give the tool a test drive. BTW, this is a 1/4" HSS tool bit I'm using. If this works I'm going to make two more. One for a 3/16" tool bit and one for a 1/8" tool bit. Why? Because the mill is all set up to mill the angles and I want to see if there is any difference in the size tools used to cut stock.

Bernd

Brass_Machine:
Looking good. I can't wait to see how it works.

bogstandard:
Bernd,

I definitely think that is stretching it a bit, hoping that rubber band will hold while taking a cut. :)

Or are you expecting the elastic band to play music while you cut? :)

Bogs

sbwhart:
Its what you call flexible tooling  :lol: :lol: :lol:

Navigation

[0] Message Index

[#] Next page

[*] Previous page