| Gallery, Projects and General > Project Logs |
| Screwcutting |
| << < (2/3) > >> |
| mhh:
If by sexy you mean the large handles then yes :D It's a Cazeneuve HB500 lovely machine! Can't seem to find a picture of the tailstock. But with fine feed and follower feed I would call it sexy! :D |
| dickda1:
mhh, Just curious, what will that rod be used for? -Dick |
| BillTodd:
--- Quote from: John Stevenson on June 28, 2011, 03:58:11 PM ---Should have turned the mill vise thru 90 and nailed a quick box up out of pallet wood to support the end in the vise. Bit of grease around the wood and you would be good to go for about 7,000 rpm John S. --- End quote --- Wise words John. Even short wobbly overhangs can get out of shape in hurry! BTW using a ER collet tapped (and taped) into the end of my lathe's spindle works quite well: |
| doubleboost:
I would have to poke a hole in the wall to do that :( :( :( :( Looks like a nice thread John |
| John Hill:
I wonder if I could put my lathe on wheels, then I could wheel it outside if I ever need to turn any long stuff. :scratch: |
| Navigation |
| Message Index |
| Next page |
| Previous page |