Thanks Jack
Now for the inner steam dome, the regulator fit in this and sits on top of the boiler where the dry steam collects. Its fabricated from 1 1/8 dia copper tube and copper/Phos bronze:- here are the bits set up for soldering, I used the brass bar to keep the copper collar in place.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Mable%20Regulator/100_3478.jpg)
Whoops
![:doh:](https://madmodder.net/Smileys/default/doh-45.gif)
:-- Soldered one of the brass bars to the dome
![:D](https://madmodder.net/Smileys/default/Bounce.gif)
![](http://i431.photobucket.com/albums/qq32/sbwhart/Mable%20Regulator/100_3481.jpg)
Never mind just cleaned off when I set the job up true in the lathe to clean the face that will seal on the boiler.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Mable%20Regulator/100_3483.jpg)
Last job drill 12 holes in the collar for bolting to the boiler, using the PCD feature on the DRO.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Mable%20Regulator/100_3484.jpg)
Thats it another one off the list.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Mable%20Regulator/100_3489.jpg)
Cheers
Have fun
Stew