stuart turner 10v help

[earnie]

hi all this is my first post here
i recently aquired a stuart 10v kit and need the book on how to build this or drawings
any and all help would be appreciated
this kit is about 60% machined
there are many questions to be asked but i cant logically ask these till i have plans or books
i ordered a plans set from stuart dont have an idea when it will arrive as i live in the us and the plans are coming from the uk
i see a book was published regarding this model called " building  a vertical steam engine from castings " by andrew smith, revised by pengwern

does anyone have a copy of this book or where one could source this thanks

[Bluechip]

hi all this is my first post here
i recently aquired a stuart 10v kit and need the book on how to build this or drawings
any and all help would be appreciated
this kit is about 60% machined
there are many questions to be asked but i cant logically ask these till i have plans or books
i ordered a plans set from stuart dont have an idea when it will arrive as i live in the us and the plans are coming from the uk
i see a book was published regarding this model called " building  a vertical steam engine from castings " by andrew smith, revised by pengwern

does anyone have a copy of this book or where one could source this thanks

Hi Earnie

Welcome to the Forum 

UK source herewith:

http://www.camdenmin.co.uk/construction-manuals/building-a-vertical-steam-engine-p-2094.html

Also apparently on Amazon US for some horrendous prices 'used'

IF it's the same book ??

Dave BC

[saw]

Hi earnie is it the drawing that you need?

[earnie]

Hi earnie is it the drawing that you need?

yes i need the drawing and any and all advice on these things thanks

[raynerd]

pm sent 

[earnie]

Hi earnie is it the drawing that you need?

thank you sir email received great drawings
thanks

[saw]

You are welcome(not sir I am Benni  )

[madjackghengis]

Hi Earnie, welcome to the pack   I'm glad you got some drawings, and hope to see some metal chips soon, and see you on your way to a fine engine that runs.  It's always great to see new names and new projects on the site, the more the merrier.  Good luck with that Stuart,    Cheers, Jack

[earnie]

thanks gents, this thing does require some work, however im ok with it,
since i dont have a lathe= i have turned over the centering and drilling of the flywheel,the manufacturing of the eccentric bushing, and mannufacturing of the piston to a freind at work
the rest of this i can handle here at home
thanks for the help here

[saw]

It's good that you have a friend to help you, but it is a heavy way to build a engine on 

[earnie]

thanks benni, the drawings you sent show me that at least 70% was finished
i beleive that i am off in a good way to finishing this
i will put up some pics soon of what i have

[saw]

I am very glad that I could help you.