Hit n Miss Engine ,,,,to MR D Kerzel's design

Gallery, Projects and General > Project Logs

<< < (27/38) > >>

metalmad:
Hi Rob
That Tank looks great
The mounting tabs are sensational and I doubt u will have too much trouble with the kerzel sucking up the fuel from the tank.
I did have some trouble filling up the tank due to an air lock, but a breather fixed that.
:beer:

arnoldb:
Great job Rob :clap:

:poke: :poke: I see the CNC does the same to you as normal computers :lol: :lol:; now a DRO would REALLY help you make a mess :doh: :lol: :lol: :lol:

:beer:, Arnold

jpm:
Hi Rob , question for you, did you find out why you cnc m/c took, as you put it “ a mental” , I was wondering did you programme each pocket separate or program one pocket and loop it to a 60 degree datum shift and repeat it another 5 times , very strange it should go walkabout on the 4th pocket ,???,,,,,,,,,,jeff,,,,,,,,

Rob.Wilson:

--- Quote from: jpm on June 19, 2011, 03:48:49 AM ---Hi Rob , question for you, did you find out why you cnc m/c took, as you put it “ a mental” , I was wondering did you programme each pocket separate or program one pocket and loop it to a 60 degree datum shift and repeat it another 5 times , very strange it should go walkabout on the 4th pocket ,???,,,,,,,,,,jeff,,,,,,,,

--- End quote ---

Hi Jeff

I still have no idea why the machine went walk about , as it cut the next two flywheels no problem , I selected all the pocket chains and programmed all to the same depth ,wall offset ,,,,,,, never thought about doing it "program one pocket and loop it to a 60 degree datum shift and repeat it another 5 times" maybe because i am not that good :lol: :lol: :lol:

It could be the old computer i am using ?

Rob :D

metalmad:
hay Rob
try using a pencil eraser to clean your computer's Ram terminals,
might give it a new lease on life :zap:
Pete

Navigation

 Message Index

Go to full version