| Gallery, Projects and General > Project Logs |
| 2" Fowler Traction Engine |
| << < (4/6) > >> |
| Jasonb:
Thanks for all the kind comments, I'll make sure to keep you all upto date with progress. I had intended this engine to be a long term project with a few smaller items done along the way but seem to have rather concentrated on the Traction Engine ::) For anyone interested I have taken pictures of most of the individual parts and they are in this album J |
| saw:
I have been viewing all of your'e photos and I am so inpresse. :bow: :bow: :bow: A stupid question, is anything done by casting or have you done everything by your'e self? :dremel: I wich that I could do anything like that :( |
| Brass_Machine:
:jaw: :jaw: :jaw: :jaw: :bow: |
| CallMeAl:
Wonderful - no other word fits. |
| Jasonb:
There are approx 50 castings plus some lazer cut parts like the spokes and a few spinnings like the gear gaurd outers and spud pan (dish under axle) Its getting very close to its finished weight of around 70kg, 150lbs Unfortunately I have not taken very many in progress pictures on this engine but there are a few here Jason |
| Navigation |
| Message Index |
| Next page |
| Previous page |