Yes, that's right the lathe is a Boxford AUD. I forgot to mention the shed is 4.5 X 4.0 metres. It is kept warm, about 18degrees centigrade with a small oil filled radiator which is on its minimum setting. It has been snug all through the winter.
DSC_6863 by
Anzaniste, on Flickr
This view is looking back towards the double door, to the right. I put in a double door on the grounds that I had no idea what I might want to put in or take out of the shed.
DSC_6862 by
Anzaniste, on Flickr
This view is looking back to wards the left of the door, in view is my wood working bench, not the best placed 'cos the end vice is inside trhe door frame and long bits of timber can't poke out through the door..
DSC_6865 by
Anzaniste, on Flickr
This view is of the right hand wall, coming through the door, at the end furthest away from the door. In view is the Centec 2A milling machine, the NuTool chinese drill press, note the vintage car jack that is used to give the drill table a bit of ridgidity which it lacks of it's own account. You can just see the Boxford.
Currently I'm hanging my nose over a Leinen LZ 4S spotted in a local machine tool dealer's; sssshhhhhh don't tell the Boxford.
More to follow.