Hi all! Been lurking here for a while, reading and learning quite a lot of stuff, while looking for a lathe and possibly a small mill
I'd like to be able to make small parts for my bike resto project, and maybe some small engines later on...I work as a security officer, and at one place I do my rounds there is a large prototype machine shop, that gives me serious tool envy! In another part of that building, there is a Deckel FP1 mill, and a Gaziano SAG12 lathe standing idle... Too big for my small shop (10'x10'/3x3m), but...
I've been reading at other forums, and I choose MadModder due to the rather friendly atmosphere and characters here.

Kjelle (owner of 1,5 Ancillotti MX/Enduro bikes)