« previous next »
Pages: 1 ... 3 4 [5]   Go Down

Author Topic: Harrogate May 2011  (Read 48347 times)

Offline Bogstandard

  • Bogs Group
  • Hero Member
  • *****
  • Posts: 1107
Re: Harrogate May 2011
« Reply #100 on: May 15, 2011, 01:22:13 PM »
If it looks that well holding a door open, imagine what it will be like when it is fitted onto an engine.

Stew dropped the casting off to me this afternoon, and I am gobsmacked at how nice a job Rob has made of it just from looking at my scabby little C-0-C's. :bow: :bow: :bow:

It is now up to me to make a good job of finishing it off, eventually.

Who needs to go to the show to think that Christmas has come early.

Oh!, I nearly forgot, my thanks also go to Dave Bluechip for the most welcome screw in contact points, only a few months late (and we all know who's fault that was, don't we Rob). :lol: :lol:


John
Logged
If you don't try it, you will never know if you can do it.

Location - Crewe, Cheshire

Skype - bandit175

Offline millwright

  • Sr. Member
  • ****
  • Posts: 273
  • Country: gb
  • Leeds West Yorshire
Re: Harrogate May 2011
« Reply #101 on: May 15, 2011, 05:35:47 PM »
 Nice to meet the modders that i did yesterday, didnt get to speak to all. but enjoyed thet chats i had, nice to see some faces. Show was good not been for 2yrs i didnt leave till 4.30 and was in at 10 knees not working so well today (waiting for new knee joints mmmm could perhaps get them done on here) resisted the temptation to spend too much. I was going to post some pics but dont seenm to be able to, i have a folder of resized pics which i have tried to paste into this page but the paste facility is greyed out. am i doing something wrong here? have read the various threads on posting pics but not having any joy, a point in the right direction would be appreciated, thanks
John
Logged

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2570
  • Country: us
Re: Harrogate May 2011
« Reply #102 on: May 15, 2011, 06:39:16 PM »
easiest way would be to get a photobucket account or what they are called if on your side of the pond if they are different than this side. Then copy the img and past in the post.
 :thumbup:
Logged
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Harrogate May 2011
« Reply #103 on: May 16, 2011, 08:45:59 AM »
Malcolm Parker-Lisberg has put up a video taken on Sunday:



Andy
Logged
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Harrogate May 2011
« Reply #104 on: May 19, 2011, 03:42:25 PM »
Just like to say a big thank you to all of you who went to the trouble of taking and posting your photos.

Too far for a day trip for me, this way I can see what going on. :D

Thanks guys
 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: Harrogate May 2011
« Reply #105 on: May 21, 2011, 04:46:06 PM »
Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2570
  • Country: us
Re: Harrogate May 2011
« Reply #106 on: May 21, 2011, 08:43:01 PM »
More great stuff!
Logged
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: Harrogate May 2011
« Reply #107 on: May 23, 2011, 05:20:27 PM »
Some more from the same source.

Rather nice looking V-Twin with a Cross Rotary Valve.

Should really be valves, as there are two cylinders ...  :scratch:

Edit post might improve with a link ???

http://modelengineeringwebsite.com/Harrogate_pt2.html#8


Dave BC
Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline DennisWA

  • Jr. Member
  • **
  • Posts: 34
Re: Harrogate May 2011
« Reply #108 on: May 23, 2011, 08:04:12 PM »
A great set of pics to remind me of my visit. Thanks for posting the link! :thumbup:

Dennis
Logged
Pages: 1 ... 3 4 [5]   Go Up
« previous next »