« previous next »
Pages: [1]   Go Down

Author Topic: cut off saw  (Read 7385 times)

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
cut off saw
« on: January 15, 2011, 07:09:42 AM »
Hi all, can anyone recommend a particular make of cut off saw for cutting brass and steel, but not at the same time obviously :lol: I use the one at work, but the guys complain when I chop stuff in their dinner break  ::). So I fancy having one at home, so that I can annoy the wife when she's watching her soaps on tv  :lol:

The one at work cost over £700  :bugeye: I'm not that rich  :( so the cheaper the better  :)

Cheers
Rob  :thumbup:
Logged

Offline benchmark

  • Jr. Member
  • **
  • Posts: 43
Re: cut off saw
« Reply #1 on: January 15, 2011, 09:24:50 AM »
A friend recently recommended this one for smaller more precise work. It will fit nicely indoors .I have bought one but still waiting for it to arrive from the USA.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140413814011&ssPageName=STRK:MEWNX:IT



I have a larger power saw for thicker stock
Logged
See pictures and videos of my collection:
http://dampmaskiner.webs.com

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
Re: cut off saw
« Reply #2 on: January 15, 2011, 04:12:54 PM »
I have the Evolution 355mm dia cut off saw witha carbide blade...Makes short work of steel.. :)

Got mine form Aldi for £80 but they're about double that from Machine Mart
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline SKIPRAT

  • Jr. Member
  • **
  • Posts: 92
  • Country: gb
  • Gainsborough Lincolnshire England
Re: cut off saw
« Reply #3 on: January 15, 2011, 05:54:51 PM »
Hi There

I am a big fan of the Evolution carbide cut off saw as well.

Cheers Paul
Logged
One Mans Junk Is Another Man's Treasure G6FOW

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
  • Country: england
Re: cut off saw
« Reply #4 on: January 16, 2011, 04:44:36 AM »
Quote from: benchmark on January 15, 2011, 09:24:50 AM
A friend recently recommended this one for smaller more precise work. It will fit nicely indoors .I have bought one but still waiting for it to arrive from the USA.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140413814011&ssPageName=STRK:MEWNX:IT

I have a larger power saw for thicker stock

Bit small for what I need, but its a snazzy little machine, thanks for posting the vid Benchmark  :beer:
Evolution it is, thanks guys.


Rob :thumbup:
Logged

Offline yorkie_chris

  • Jr. Member
  • **
  • Posts: 87
Re: cut off saw
« Reply #5 on: January 18, 2011, 10:48:02 AM »
I had one of those cheap chinky 14" abrasive chop saws, it was pretty rubbish, I only used it for hogging through stuff but the motor died in a spectacular and sparky fashion.
Logged

Offline JimM

  • Jr. Member
  • **
  • Posts: 95
  • Chessington, Surrey
Re: cut off saw
« Reply #6 on: January 18, 2011, 11:58:23 AM »
Yep the Evolution range of saws are looked on pretty favourably over on MIG-welding.co.uk

Aldi has them occasionally (probably about time they came up again) or sometimes B&Q have them on special
Logged
Location: Chessington, Surrey
Pages: [1]   Go Up
« previous next »