Author Topic: Keyboard for sending Baudot code over parallel circuit?  (Read 2463 times)

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2016
  • Country: nz
Keyboard for sending Baudot code over parallel circuit?
« on: December 12, 2010, 03:01:23 PM »
.........  I am sure it is not but I wonder what it really was intended for?

From the den of The Artful Bodger

Offline Bogstandard

  • Bogs Group
  • Hero Member
  • *****
  • Posts: 1107
Re: Keyboard for sending Baudot code over parallel circuit?
« Reply #1 on: December 12, 2010, 03:14:42 PM »
If you had a good morse operator, he or she could send five different messages at once.  :bang: :doh:


Bogs
If you don't try it, you will never know if you can do it.

Location - Crewe, Cheshire

Skype - bandit175

Offline arnoldb

  • Hero Member
  • *****
  • Posts: 515
  • Country: na
  • Windhoek, Namibia
Re: Keyboard for sending Baudot code over parallel circuit?
« Reply #2 on: December 12, 2010, 04:09:35 PM »
Prime example of an early model PBX...  Just needs the lass with the blond hair, painted nails and irritating voice...

I'll crawl back in my hole now  :doh:

 :beer: Arnold

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2016
  • Country: nz
Re: Keyboard for sending Baudot code over parallel circuit?
« Reply #3 on: December 12, 2010, 04:42:47 PM »
If you had a good morse operator, he or she could send five different messages at once.  :bang: :doh:
Bogs

John, when I was a well laddie I sent a lot of Morse code,  weather reports, flight plans, passenger lists, etc.  Yes, they even paid me to send and receive Morse code.  We would use a typewriter when receiving and the secret for accurat work was to somehow ignore the content of the message,  "sort of in the ears and out the fingers without going near the brain".

When I came to mess around with computers it was obvious that I would be writing some More code programs and I made Morse code hardware too including a keboard that converted keystrokes into audible code.  Although others were suitably impressed with this device back in the '70's I found it impossible to use,  I would type a word while hearing it a moment later and the word or parts of the word were repeated! :doh:  It was impossible to break the old habit.
From the den of The Artful Bodger

Baldrocker

  • Guest
Re: Keyboard for sending Baudot code over parallel circuit?
« Reply #4 on: December 15, 2010, 05:26:19 PM »
 :scratch:Umm how about (sez he sticking his neck out)
Different voltages to pins on the right, output wires from the keys to
whatever bronze age machine needed variable voltages? Further,
using combinations of keys for even more variation.

br