And here's another small project which I have recently finished,this saw, I found in the friends garage, in the center of landfill parts,condition as usual lamentable rust and dirt covered most of the surface,but surprisingly the rotation was very smooth without scoring, and falls.
That's how it looked:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_68371.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_119128.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_28098.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_26759.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_44411.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_57899.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_29470.jpg)
As can be seen on the plate it was an old Chinese saw the production of Chen Feng,1977.
Disassembly phase before cleaning and sandblasting:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_66499.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_68704.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_59199.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_110699.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_50523.jpg)
I decided to make a new stand fo it,made a sketch and sent to friends on the assembly:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_27517.jpg)
Until then continued to prepare for sandblasting what all openings were closed:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_79931.jpg)
And here is the details after sandblasting:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_75036.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_43048.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_96524.jpg)
Preparation for painting,masking:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_40629.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_44076.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_69222.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_46823.jpg)
In the process of preparation, I drew attention to the fact that the main pulley was broken in three places so it had to weld,is not beautiful but functional and made by professional,a frend.
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_27657.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_91336.jpg)
Painting:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_59850.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_77638.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_21857.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_75876.jpg)
Just come to my new stand:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_20173.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_45200.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_61567.jpg)
Assembly:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_83636.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_73476.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_37424.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_35240.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_13813.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_27641.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_30925.jpg)
As you can see, I just moved the engine and made a new stand:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_6666.jpg)
Well, that's the first chip:
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_36842.jpg)
![](http://www.chipmaker.ru/uploads/monthly_08_2010/gallery/med/gallery_4583_485_37662.jpg)