oh no another ball turner

Gallery, Projects and General > The Design Shop

<< < (6/7) > >>

j45on:
It's done :D well nearly I have no stock to make a handle :bang:
Actually I need stock for the ball as well I only had delrin
I quite like the half exposed cap screws so i'm not going to shorten them now

Ralph I went with the 16mm tip in the end so now I have 11mm and 16mm tips I will have to make something else to use the 11mm ones :proj:
And I had read your posts on building the mini ball turner and fitting the tip :bow:

Thanks for everybody's help :beer: :nrocks:

Divided he ad:
Spot on Jason :thumbup: does the job well, never turned this delrin stuff but it looks a very smooth finish :beer:

The tip looks spot on in there, you won't be disappointed with the cutting capabilities of them. I cut a lot of stainless with mine and it works a treat :)

Glad you found the post, I couldn't remember which one had it in ::)

The 11mm tips can easily be used in a smaller tool post for finer work or even make some new turning tools? I've still got 5 of them myself.... I'll use 'em one day?

Have fun with the new addition, post up the rest when you have the stock :thumbup:

Ralph.

Rob.Wilson:
You bought that knob off Ebay :poke: :poke: :lol: :lol: :lol:

Really cracking job Jason ,,, well done :clap: :clap: :clap: :clap: :thumbup:

Rob

j45on:
Finally finished :ddb:
I found one bit of aluminium big enough for the ball and a bmw at work donated it's antiroll bar link arm for the handle (not very bling but it was free )
And finished with a bit of scotchbrite for a brushed/satin look

Then I decided to make a small one ( I only have 1' aluminium bar at the moment must go shopping )
And I thought I would buff it up a bit using a piece of sponge/foam and some polish I bought ages ago but never used :bugeye:
I was impressed I might polish the big one as well now

Divided he ad:
Nice! :beer:

That's some mighty fine looking balls you got there Jason :lol: (childish? Yes... but I couldn't resist ::) )

Looks really clean when polished up too :thumbup:

You'll soon be unstopaball :doh: I'll get me coat.....

Ralph.

Navigation

 Message Index

Go to full version