| Gallery, Projects and General > The Design Shop |
| oh no another ball turner |
| << < (4/7) > >> |
| No1_sonuk:
--- Quote from: ksor on August 24, 2010, 05:32:11 AM ---Oh, yes - I'm making one too ! but I have NOT yet decided what kind of bit to use. I wonder why most of you use this "arrowhead"-like bit - why not a round one - normaly a round bit gives a better finish. Correct me (so I can choose the right one for my ball turner) ! --- End quote --- The pointed one will get further into the "corner" by the shaft, making a smaller fillet between the ball and the shaft. There's nothing stopping you using both. If you need the tight fillet, use a point, but if you don't, use a round one. You just need to make an extra tool holder. |
| j45on:
Slowly getting there :hammer: Lapped together with valve grinding paste A little drop of oil and it is a pain to get apart again:D keychain torch + magnet = boring light :dremel: |
| Rob.Wilson:
Nice project Jason :thumbup: Hows coming along ? Rob |
| j45on:
Hi Rob I have the material for the tool post now so hopefully I can make some progress this weekend :hammer: I still have not decided which type or size of insert I'm going to use yet :scratch: |
| j45on:
I'm nearly done just need to shorten the cap screws and make a handle. Right off to ebay to search for inserts :hammer: |
| Navigation |
| Message Index |
| Next page |
| Previous page |