| Gallery, Projects and General > Project Logs |
| Moteur oscillant double effect |
| << < (10/19) > >> |
| sbwhart:
Thanks Bernd I don't won't to give you night mares Dave but the next bit requires a jig also. :D The next bit is the stuffing box come cylinder head thingy :scratch: Another job with a lot of lathe work. Turn down a goodly length enough to make 2 or 3 from Turn down, drill, part off, Turn down, drill, part off, turn down another goodly length repeat repeat repeat. And you end up with a box of bits. These are not finished yet I've got to turn the register for the cylinder on the other end, Drill some holes WITH A JIG. and square the flange off, but before I do that I'm going to pick the boiler job up again for a couple of days I hope fingers crossed and all that. Stew |
| Stilldrillin:
Stew, No nightmares, these days..... :thumbup: I don't miss it one bit! :D Nice work, again..... :clap: David D |
| spuddevans:
Looking good Stew :thumbup: I'm following this with interest as I have a future build where I may be making between 8-10 cylinders for either a V4 or V8 wobbler. So I am taking note of all your hints/tips/jigs for multiple parts manufacturing. Tim |
| Bluechip:
--- Quote from: Stilldrillin on August 27, 2010, 03:57:20 PM ---Stew, No nightmares, these days..... :thumbup: I don't miss it one bit! :D Nice work, again..... :clap: David D --- End quote --- Is that a stool bottom RH corner ?? Don't look very comfy :( I would have wanted one better than that, no cushion, no armrests ... damn poor show .. Dave BC |
| Stilldrillin:
Dave, You're just a softie....... I woz well 'ard, in them days...... Sufferin' for it now....... ::) David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |