« previous next »
Pages: [1]   Go Down

Author Topic: Machining Copper Pipe.  (Read 20292 times)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Machining Copper Pipe.
« on: July 23, 2010, 02:40:04 PM »
I posted this on my other, steamtoy forum, where lots of `em mess around with bits of pipe etc...... Then I realised there were probably even more, new lathe users on Modder........   ::)

............................

I was facing up a length of 40mm bore pipe, when I remembered..... Two new lathe owners, had mentioned having "moments" when working copper pipe.   :bugeye:

Here`s how I do it......

Two neatly fitting bungs. (The yellow stuff`s plastic. Hard wood would be ok).

Plain bung for chuck end, to stop crushing. Tailstock end with convenient sized hole.





Paper inside to keep em apart.




Convenient sized rod in convenient sized hole. Machine as you like!




Works for me!   :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Machining Copper Pipe.
« Reply #1 on: July 23, 2010, 03:52:50 PM »
Seen that done with two pieces of hard wood for the plugs (bungs).

Now, when machining copper be sure to add mouse milk to the tool. Helps with the finish.

Bernd
Logged
Route of the Black Diamonds

Offline wheeltapper

  • Sr. Member
  • ****
  • Posts: 345
  • Country: gb
  • Spixworth Norfolk
Re: Machining Copper Pipe.
« Reply #2 on: July 23, 2010, 05:27:55 PM »
does rat milk work? I know fat tony's got some he can't sell  :lol: :lol:

Roy
Logged
I used to be confused, now I just don't know.

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Machining Copper Pipe.
« Reply #3 on: July 23, 2010, 07:40:27 PM »
Quote from: wheeltapper on July 23, 2010, 05:27:55 PM
does rat milk work? I know fat tony's got some he can't sell  :lol: :lol:

Roy

Never tried it. I found rats to be harder to milk.  :lol: :lol:

I'm bad. I've taken this way  :offtopic:. Time to get back on topic.

Bernd
Logged
Route of the Black Diamonds

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Machining Copper Pipe.
« Reply #4 on: July 24, 2010, 02:03:29 AM »
Quote from: Bernd on July 23, 2010, 07:40:27 PM
Quote from: wheeltapper on July 23, 2010, 05:27:55 PM
does rat milk work? I know fat tony's got some he can't sell  :lol: :lol:

Roy

Never tried it. I found rats to be harder to milk.  :lol: :lol:

I'm bad. I've taken this way  :offtopic:. Time to get back on topic.

Bernd

Topic Bernd?

What topic? I`m too busy looking for a herd of mice to milk......   :lol: :lol:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Machining Copper Pipe.
« Reply #5 on: July 24, 2010, 08:44:58 AM »
Quote from: Stilldrillin on July 24, 2010, 02:03:29 AM

Topic Bernd?

What topic? I`m too busy looking for a herd of mice to milk......   :lol: :lol:

David D

They are hard to find at times. :)
Logged
Route of the Black Diamonds

Online John Rudd

  • Hero Member
  • *****
  • Posts: 2532
  • Country: gb
Re: Machining Copper Pipe.
« Reply #6 on: July 24, 2010, 11:29:45 AM »
Quote from: Bernd on July 23, 2010, 03:52:50 PM
Seen that done with two pieces of hard wood for the plugs (bungs).

Now, when machining copper be sure to add mouse milk to the tool. Helps with the finish.

Bernd

For the lesser educated...What's mouse milk.... :scratch:
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline DMIOM

  • Hero Member
  • *****
  • Posts: 676
  • Country: gb
  • Isle of Man
Re: Machining Copper Pipe.
« Reply #7 on: July 24, 2010, 11:38:17 AM »
Quote from: John Rudd on July 24, 2010, 11:29:45 AM
....What's mouse milk.... :scratch:
 

Tis a brand of penetrating oil (like 3-in-1)  www.mousemilk.com
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Machining Copper Pipe.
« Reply #8 on: July 24, 2010, 12:01:36 PM »
Quote
Tis a brand of penetrating oil (like 3-in-1)  www.mousemilk.com

Actually it's sort of a tail (no pun intended) that you tell a newbie that is working with copper for the first time. In Guy Lautard's Bedside Readers there is an anecdote about tapping copper and that using milk gives better results. This is true.

But some where in the years since I've had those books I came across a story of using milk to machine copper. Then the question came up as to what kind of milk and mouse milk was suggested as a joke to the newbie working copper for the first time. I wish I could remember were I saw that.

It's always fun to put something like this in a conversion just to see the reaction of the readers. But then somebody comes along does a google and actually finds a product called mouse mill. Now I wonder if the mouse milk story came first or the mouse milk product came first. Kind of like the chicken and the egg.

Oh well, back to machining. :beer:

Bernd
Logged
Route of the Black Diamonds

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Machining Copper Pipe.
« Reply #9 on: July 24, 2010, 12:20:56 PM »
Quote from: John Rudd on July 24, 2010, 11:29:45 AM
Quote from: Bernd on July 23, 2010, 03:52:50 PM
Seen that done with two pieces of hard wood for the plugs (bungs).

Now, when machining copper be sure to add mouse milk to the tool. Helps with the finish.

Bernd

For the lesser educated...What's mouse milk.... :scratch:

My usual mouse milk comes in a container labelled WD40.........  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: Machining Copper Pipe.
« Reply #10 on: July 24, 2010, 01:23:20 PM »
Mousemilk ?

Description sounds like PlusGas ..

Very effective if your nuts have got seized ..     :lol:  :lol:

Dave BC
Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Machining Copper Pipe.
« Reply #11 on: July 25, 2010, 02:31:16 AM »
Quote from: Bluechip on July 24, 2010, 01:23:20 PM
Mousemilk ?

Description sounds like PlusGas ..

Very effective if your nuts have got seized ..     :lol:  :lol:

Dave BC

As many members may remember...... I have a pair  of Dave`s nuts..... Unseized...... Free.......  :thumbup:

They`re larger than mine were.  :bugeye:

Good stuff that Plus Gas!   :lol:  :lol:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!
Pages: [1]   Go Up
« previous next »