Thanks to a fellow Madmodder

[Bernd]

I'd like to extend a hardy thank you to Bob Warfield for a nice write up on his web site of some of our talented members and their projects.

Thanks Bob

Oh, for those who need to find Bob's site here's a link. http://www.cnccookbook.com/index.htm

Bernd

[dsquire]

Bob Warfield

Thanks on behalf of the MadModder members that you have mentioned as well as myself. I have been there before but you have added many new links since then. I followed a few of them and here I am a day later and have still not seen everything that I want to see. 

Thanks Bernd as well for posting the link to the cnccookbook, there is something there for everyone. 

Cheers 

Don

[stefang]

Thanks to Bobs Blob, i found the home model engine machinists board and also this board

Thank you

Stefan

[Rob.Wilson]

Thanks Bob    and thanks to Bernd  for pointing me/us to  Bob Warfield site ,,,,,,,,, great site ,,,,,,,,, i must get my finger out and do a bit more on my cnc mill


Thanks Rob

[John Stevenson]

Well stop swanning round the country drinking tea with three sugars in and get your finger out.

.

[Brass_Machine]

Thanks for the mention Bob!

Haven't been to your blog in awhile... spent some good time there today.

Well stop swanning round the country drinking tea with three sugars in and get your finger out.

Bahaha 

Don't worry Rob... I gotta work on mine too!

Eric

[BobWarfield]

Guys, you are entirely too kind.

I wanted to give a call out to MadModder on CNCCookbook, because there are so many great machinists and projects to be seen here!

 

Online boards are a lot like neighborhoods--they're made by their residents.  This neighborhood has such a great vibe I hope all interested machinists get a chance to see it and participate.

Best Regards,

Bob Warfield

[Rob.Wilson]

Thanks for the mention Bob!

Haven't been to your blog in awhile... spent some good time there today.

Well stop swanning round the country drinking tea with three sugars in and get your finger out.

Bahaha  

Don't worry Rob... I gotta work on mine too!



Eric

Hi Eric ,,,,,,, my mill works ,,,,,,,,,,,just i cant work it   will have a cup of tea and think about it  

Anyone wanting a cool bit of software should take a look at Bob's GWizard ,,,,,,,,,,,,, downloaded it yesterday and used it today to get the position of the timing gear shaft on the casting ,,,,,,, a must for any shop   Thanks Bob

Rob

[John Stevenson]

Except it needs this crap Adobe software to run.
No way is that shït going on my machine.

John S.

[Rob.Wilson]

Except it needs this crap Adobe software to run.
No way is that shït going on my machine.

John S.

And whats wrong with Adobe John ?  


Rob

[Baldrocker]

Rob.

my mill works ,,,,,,,,,,,just i cant work it

Its simple follow BR's crash course in milling.
One bit goes backwards and forwards and from side to side, another bit goes up and down
and yet another bit goes roundy roundy
There you go nothing simpler.
A Nony Mouse