« previous next »
Pages: [1]   Go Down

Author Topic: Tooling Storage  (Read 21562 times)

Rob.Wilson

  • Guest
Tooling Storage
« on: June 24, 2010, 04:51:21 PM »
Hi Lads

A bit warm here at the moment and i could not be be bothered to over heat my one brain cell by thinking , so i thought i would improve the shop a bit and make up some racks/holders for tooling , so things are more to hand , The racks are made from what i had at had lying round the shop ,,,,,,,so thats why things are the size they are ,,,,,, less thinking  ::)
Mostly 3mm plate and 40x40 box .

small stand for the heavier mill stuff ,save's having to bend down and rummage about in a cabinet
 

A holder for milling tooling , made from a length of "L" section and a bit flat bar welded together



A drill rack for my metric 3MT and 2MT drills and stuff , made from a few lenghts of box and 3mm plate ,,with lots of holes poked in it ,,,,much the same as my IMP MT drill rack



And a rack for my Myford lathe quick change tooling ,,,,,3mm plate with lugs at 45 deg,,,,,,,,,,, need to make another one for me larger quick change tool holder



Anyone got any other tooling storage ideas ?


Cheers Rob



Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Tooling Storage
« Reply #1 on: June 24, 2010, 08:19:44 PM »
Nice Rob.

Wish I had that many tools.  :lol:

Bernd
Logged
Route of the Black Diamonds

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2911
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Tooling Storage
« Reply #2 on: June 25, 2010, 02:13:45 PM »
Stonkin work rob - looks great, I need some organisational skills. I wish I could weld.
Chris
Logged

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Tooling Storage
« Reply #3 on: June 25, 2010, 04:12:41 PM »
I normally just chuck everything on the floor.

John S.
Logged
John Stevenson

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Tooling Storage
« Reply #4 on: June 26, 2010, 02:11:50 AM »
Nicely done Rob!  :thumbup:



BUT! I`m really not sure about tidy workshops...... :scratch:

Don`t seem right to me!

Mine`s not been really tidy since I built it....... 38yrs ago!

David D





Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2911
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: Tooling Storage
« Reply #5 on: June 26, 2010, 03:16:25 AM »
Mine is never tidy and consequently I spend more time looking for a tool than I do using it!!!!  :doh:
Logged

Offline z3t4

  • Jr. Member
  • **
  • Posts: 26
  • Country: 00
Re: Tooling Storage
« Reply #6 on: June 26, 2010, 05:17:02 AM »
Pointless me tidying up. I can never find stuff afterwards.
:)
Logged

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: Tooling Storage
« Reply #7 on: June 26, 2010, 05:50:05 AM »

I fully support that nice Mr. Stevenson..

Shame on you Rob Wilson ..

Just look at all the precious world resources you have used to store a few bits and pieces.   :(

A Gravity Powered Inventory Allocation and Retrieval System as used by Mr. S, Dave SD, and, indeed myself, costs nothing to build and run.

Repent, I say. Repent before it is too late ...

Dave BC





Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.

Rob.Wilson

  • Guest
Re: Tooling Storage
« Reply #8 on: June 26, 2010, 02:51:48 PM »
 :lol: :lol: :lol: :lol: :lol: :lol: i new i would get some stick  :lol: :lol: :lol: :lol:

Rob
Logged

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: Tooling Storage
« Reply #9 on: June 26, 2010, 03:46:09 PM »

Aw, .. go on !! you know you like it    :lol:  :lol:

And all for free too.  :thumbup:  :thumbup:

You only have to read the Sunday Sport to see what the upper echelons shell out for a bit of abuse ....  :lol:  :lol:


Dave BC



Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.

MrFluffy

  • Guest
Re: Tooling Storage
« Reply #10 on: July 14, 2010, 08:27:07 AM »
That qctp toolholder storage is brilliant.
I might try to copy it one day, if I can come up with a as quick and simple method to match my Multifix...
 
Logged

Offline Lew_Merrick_PE

  • Hero Member
  • *****
  • Posts: 690
  • Country: us
Re: Tooling Storage
« Reply #11 on: July 14, 2010, 01:41:55 PM »
Quote from: craynerd on June 26, 2010, 03:16:25 AM
Mine is never tidy and consequently I spend more time looking for a tool than I do using it!!!!  :doh:

Ah, the requisite half-hour search before starting work.  I used to work for a company located in a 25,000 sq ft building.  It could take me half a day to find the drill index when I needed to drill a clearance hole.  Such experiences change you...
Logged

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2448
  • Country: gb
Re: Tooling Storage
« Reply #12 on: July 14, 2010, 04:07:17 PM »
Quote from: John Stevenson on June 25, 2010, 04:12:41 PM
I normally just chuck everything on the floor.

Don't worry John, no-one would ever know, what with all the junk stock you throw down there too.  :lol:


Rob - nice work, I echo Chris's sentiment, I wish I could weld.... Supposed I'd better learn, eh? The trouble is, having a welding/fabrication shop right next door makes one a bit lazy in that regard...
Logged
Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Rob.Wilson

  • Guest
Re: Tooling Storage
« Reply #13 on: July 14, 2010, 04:54:51 PM »
Thanks lads ,,,,,,,,,,,,,,, well some of you  ::)  :lol:

Just to use up some more of the worlds resource's of scrap off cuts of steel ,  i made some more  :coffee:
 


Every thing just were i need it  :med:

And i still have a bit wall spare  :lol: :lol: :lol:


Cheers Rob  :D
Logged

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Tooling Storage
« Reply #14 on: July 14, 2010, 04:59:04 PM »
Quote from: Rob.Wilson on July 14, 2010, 04:54:51 PM


And i still have a bit wall spare  :lol: :lol: :lol:


Cheers Rob  :D


How much for the vertical floor ??

John S.
Logged
John Stevenson

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2023
  • Country: nz
Re: Tooling Storage
« Reply #15 on: July 14, 2010, 06:43:06 PM »
I am looking for some magnetic wall covering to make a vertical virtual floor.
Logged
From the den of The Artful Bodger

Offline DMIOM

  • Hero Member
  • *****
  • Posts: 676
  • Country: gb
  • Isle of Man
Re: Tooling Storage
« Reply #16 on: July 15, 2010, 04:01:13 AM »
Quote from: John Hill on July 14, 2010, 06:43:06 PM
I am looking for some magnetic wall covering to make a vertical virtual floor.

well (O/T) I have seen, at a fairground once, something similar for children - it appeared to be wall covered in one type of velcro & the kids were clad in the other half of velcro and they jumped up and see how far up the wall they could get - but I did see one parent reaching up and hanging one of his kids on the wall and then apparently walking away .....

We've established there are those of us who minimise entropy by adopting the gravity-driven approach, and those who apparently try to defy gravity and store their items with an increasing potential-energy gradient - but Gravity always wins - just leave it long enough !

and ...... is it in fact a "Capricorn One" scenario - bricks can be laid flat on the floor as well as stacked to make a wall???  and I do seem to recall someone telling us about painting with floor paint ....   ::)
« Last Edit: July 15, 2010, 04:04:57 AM by DMIOM »
Logged

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Tooling Storage
« Reply #17 on: July 16, 2010, 02:38:11 AM »
Fantastic work as always Rob, the tool storage racks look stunning ..... as always  :clap: :clap: :clap:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Tooling Storage
« Reply #18 on: July 16, 2010, 03:44:04 AM »
Quote from: Darren on July 16, 2010, 02:38:11 AM
Fantastic work as always Rob, the tool storage racks look stunning ..... as always  :clap: :clap: :clap:

He`s too good for this place.......  ::)

  :lol:  :lol:  :lol:  :lol:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Tooling Storage
« Reply #19 on: July 16, 2010, 04:17:39 AM »
Always fancied going up to watch him whilst he's working and keep nudging his elbow.

You can't take anything away from how he does things and the quality, need a change of plan now and start taking the piss out of his spelling.

John S.
Logged
John Stevenson

Rob.Wilson

  • Guest
Re: Tooling Storage
« Reply #20 on: July 16, 2010, 11:44:37 AM »
 :lol: :lol: :lol: :lol: :lol: :lol: :lol: cheers lads
 :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:  John i use Google chrome now   :) ,,,,,,,,,,so if me spelling is wrong its googles fault  :lol: :lol: :lol: :lol:


Velcro mmmmmmmmmmmmmmmmmmmm i could stick tools to the shop ceiling  :med:

Rob
Logged

Offline Dean W

  • Hero Member
  • *****
  • Posts: 571
  • My kingdom for a lathe!
    • Projects web pages
Re: Tooling Storage
« Reply #21 on: July 16, 2010, 11:29:41 PM »
Quote from: Rob.Wilson on July 16, 2010, 11:44:37 AM

Velcro mmmmmmmmmmmmmmmmmmmm i could stick tools to the shop ceiling 

Rob


Eventually Rob, you'll end up with knots on your noggin.   
 :hammer:

Dean
Logged
Dean W.

Shop Projects:
http://www.deansphotographica.com/machining/projects/projects.html

Praise the Lord and pass the Carbide!

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Tooling Storage
« Reply #22 on: July 17, 2010, 02:00:21 AM »
Quote from: Dean W on July 16, 2010, 11:29:41 PM
Quote from: Rob.Wilson on July 16, 2010, 11:44:37 AM

Velcro mmmmmmmmmmmmmmmmmmmm i could stick tools to the shop ceiling 

Rob


Eventually Rob, you'll end up with knots on your noggin.   
 :hammer:

Dean


He`d have the ceiling on his noggin, if he did that here.....   :lol: :lol:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

MrFluffy

  • Guest
Re: Tooling Storage
« Reply #23 on: July 18, 2010, 04:52:37 AM »
Quote from: Rob.Wilson on July 16, 2010, 11:44:37 AM
John i use Google chrome now   :) ,,,,,,,,,,so if me spelling is wrong its googles fault 

Im sure your next project will be a really nice color  :lol:
Logged

Rob.Wilson

  • Guest
Re: Tooling Storage
« Reply #24 on: July 18, 2010, 05:44:14 PM »
Quote from: MrFluffy on July 18, 2010, 04:52:37 AM
Quote from: Rob.Wilson on July 16, 2010, 11:44:37 AM
John i use Google chrome now   :) ,,,,,,,,,,so if me spelling is wrong its googles fault 

Im sure your next project will be a really nice color  :lol:
:lol: :lol: :lol: :lol: :lol: :lol: 

Logged
Pages: [1]   Go Up
« previous next »