« previous next »
Pages: [1]   Go Down

Author Topic: Pimped out mini lathe  (Read 11813 times)

Offline swhite

  • Jr. Member
  • **
  • Posts: 32
Pimped out mini lathe
« on: June 06, 2010, 06:47:06 PM »
Here is my Taig lathe with some mods I did on it, I built and attached X and Y dials, depth dial on the tail stock and a dial on the head stock for the 4 jaw chuck.
Logged
Steve W.

Offline cidrontmg

  • Full Member
  • ***
  • Posts: 229
  • Country: pt
Re: Pimped out mini lathe
« Reply #1 on: June 06, 2010, 08:55:16 PM »
Wow. I´m often having serious trouble just fumbling with one clock in a somewhat bigger lathe (Myford S7).  :clap:
Logged
Olli
Penafiel
Portugal

Offline swhite

  • Jr. Member
  • **
  • Posts: 32
Re: Pimped out mini lathe
« Reply #2 on: June 06, 2010, 09:22:24 PM »
You would be surprised at how accurate you can be on a small scale with these little jewels..
Logged
Steve W.

Offline Dean W

  • Hero Member
  • *****
  • Posts: 571
  • My kingdom for a lathe!
    • Projects web pages
Re: Pimped out mini lathe
« Reply #3 on: June 07, 2010, 12:21:35 AM »
Hi Steve!

I'd recognize that diamond plate on the head and tail anywhere.
 :wave:

Dean
Logged
Dean W.

Shop Projects:
http://www.deansphotographica.com/machining/projects/projects.html

Praise the Lord and pass the Carbide!

Offline swhite

  • Jr. Member
  • **
  • Posts: 32
Re: Pimped out mini lathe
« Reply #4 on: June 07, 2010, 02:15:17 AM »
Hi Dean,
I would know that little engine too, any new projects?

« Last Edit: June 07, 2010, 10:19:13 AM by swhite »
Logged
Steve W.
Pages: [1]   Go Up
« previous next »