MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome to MadModder!
Home
Help
Search
Login
Register
MadModder
»
Gallery, Projects and General
»
The Design Shop
»
A daft idea?
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: A daft idea? (Read 6035 times)
marshon
Jr. Member
Posts: 15
Doh!
A daft idea?
«
on:
May 28, 2010, 09:59:01 AM »
Hi guys,
I have plans to construct a simple aluminium smelter. It's a real simple charcoal burner, with a basic blower (a hairdryer in the plans). But since this thing will be used WELL AWAY from the house I was wondering if a Stirling would be powerful enough to drive a fan and make the entire thing 'self contained'? It would save on electric and probably be more robust as well. I was thinking of 'tapping' some of the smelter's own heat as the external combustion required for the engine, but would a Stirling have enough 'oomph' to drive the fan at sufficient speed? I know that friction is the bane of most types of Stirling so I was just wondering really. Something along the lines of the one in this video .....
http://www.youtube.com/watch?v=fP6UH4Vuxsc
The easiest fan to use would be a centrifugal if I can find one small enough, or build one myself. It's a long term thing so time is less important than money.
Wadda ya all think?
Logged
Rob.Wilson
Guest
Re: A daft idea?
«
Reply #1 on:
May 28, 2010, 11:01:57 AM »
Hi marshon
Good to here your getting into casting
,, i reckon you would be better off making a blower ,,,,, then casting up some part to make the hot air engine
Cheers Rob
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
Gallery, Projects and General
»
The Design Shop
»
A daft idea?