Hi
My names Geoff, and I'm an alc.....whoa wrong forum.
Start again
I'm a retired electronics engineer, into guitars in a big way, and toy steam as well. In my last 15 years at work I was the chief engineer at a big printers in the UK, so had a lot of exposure to machine shops, I always fancied doing my own lathe work, and have been inspired by work done for me by one of your forum members, Stilldrillin'. Were both members of the main Mamod forum, and David suggsted that I join this one as a good place to start on the learning curve.
I've bought a C2 lathe which should arrive on Wednesday, and I have a large pillar drill and bench grinder with a flap wheel polisher fitted. I can weld, MIG and gas, but don't have the facilities these days. I also own a Mazda MX5 and help to run a Mazda forum ..
I'll probably just look and learn for a while, but when I get going I'm sure I'll be a regular visitor
Cheers guys
Verithingeoff---
http://www.verithingeoff.com/