Yes, I saw that.
I was wondering if I should post a comparison and ask for feedback on whether I should sell my unused 7" x 14" and buy the 7" x 16".

The bottom line is that even though it is not yet working,
I have a Mill/Drill.
As for the lathe...
The 7" x 16" has two more inches capacity than the the 7" x 14".
The 7" x 16" is 38" long. The 7" x 14" is 35" long.
The 7" x 16" doesn't have digital read-out for spindle speed like the 7" x 14".
The 7" x 16" has a 500 watt brush-less motor which is .067hp Vs. the 0.47 for the 7" x 14".
The 7" x 16" spindle speed is between 0 and 2,500 rpm, and the 7" x 14" spindle speed is between 100 and 3,000 rpm.
The 7" x 16" has a belt drive. And the 7" x 14" has metal gears.
The 7" x 16" is four pounds lighter than the 7" x 14".(Which is not necessarily a good thing).
Darren