MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Check out the latest projects here:
Project Logs
Home
Help
Search
Login
Register
MadModder
»
Gallery, Projects and General
»
Gallery
»
Myford Slotting Tool
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Myford Slotting Tool (Read 13031 times)
mickn
Jr. Member
Posts: 21
Myford Slotting Tool
«
on:
March 29, 2010, 11:51:56 AM »
Hi,
I saw a video on youtube. It showed a guy named Malcolm Parker-Lisberg who had made a keyway slotter. I was so impressed with this I thought I would have a crack at this project myself. I have cut keyways before on my lathe and
using the tool set in the toolpost and winding the carriage backwards and forwards but this idea puts no strain on the machine. This little film shows the method I used.Before anyone asks the round thing with the bolt sticking out of is a wooden bung to stop swarf etc whilst the toolpost is out.
Regards Mick
Logged
Rob.Wilson
Guest
Re: Myford Slotting Tool
«
Reply #1 on:
March 29, 2010, 02:57:58 PM »
Hi mickn
Great job
i made one last year . Here is a photo of a doodad i make to do some quick indexing from the bull wheel . so i could cut multipl key ways .
Cheers Rob
Logged
mickn
Jr. Member
Posts: 21
Re: Myford Slotting Tool
«
Reply #2 on:
March 29, 2010, 04:33:22 PM »
Hi Rob,
Thats a great idea, I didn't think of that, but what I did was to make another plate which the slotter bolts to and it brings the centreline up so that I can use it on my mill with the rotary table.
Mick
Logged
Rob.Wilson
Guest
Re: Myford Slotting Tool
«
Reply #3 on:
March 29, 2010, 05:26:10 PM »
Cheers Mick
Its ok for numbers that go into 60 , i plan to make another attachment that fits the bull wheel so i can get more divisions
, your way sounds good
Regards Rob
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
Gallery, Projects and General
»
Gallery
»
Myford Slotting Tool