The Shop > Finishing
Nickle plating
Bogstandard:
I used to work at a place that did electroless nickel plating as part of the production process.
Basically, it is a matter of just keeping the chemicals warm and it deposits nickel onto the surface of the metal put into it. You could in fact do it on a stove.
Go to any plating business and they should be able to coat your parts in very little time and very cheaply. They should give you the choice of matt or bright finish.
Make sure the surface finish is perfect, as marks will show thru.
Bogs
Navigation
[0] Message Index
[*] Previous page
Go to full version