The Shop > Finishing
Nickle plating
Powder Keg:
Have any of you done it? I'm thinking of one of Caswells kits. They look fairly straight forward. I'll be posting my results here:o)
Wes
PTsideshow:
It has been awhile, but I will say this its all in the prep as to cleanliness. Also if you have a jewelry supply house in your area check them out as most carry a line of plating supplies.
http://grobetusa.com/ see if they have a franchise's close to you. or one of them on the web.
https://www.micromark.com/ also has small scale kits.
;D
Bernd:
I've got one of Caswells powder coating kits. I think anything they sell is quality stuff. I've seen some people that have used there anodizing kits with great results and they're located close to me. :D
Bernd
DeereGuy:
I suspect I will be trying some of the plating soon myself.
rleete:
Nickel plating involves some nasty stuff. We do it here where I work. Anodizing, yeah, you take precautions with the acids, etc. But this is a whole 'nuther level of health issues. I would not recommend it for home/hobby use.
Navigation
[0] Message Index
[#] Next page
Go to full version