« previous next »
Pages: [1]   Go Down

Author Topic: My First Flame Licker  (Read 14752 times)

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
My First Flame Licker
« on: January 05, 2010, 08:27:52 AM »
Hi all,

Here are a couple of pics and videos of short runs it's done so far. I still need to do some fine tuning, and hopefully it'll be a good runner. I think I bit off more than I could chew with this one!

Nick















Logged
Location: County Durham (North East England)

Offline raynerd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2911
  • Country: gb
    • Raynerds Projects - Raynerd.co.uk
Re: My First Flame Licker
« Reply #1 on: January 05, 2010, 11:19:57 AM »
Very impressive Nick! Nice work.

Chris
Logged

Offline usn ret

  • Full Member
  • ***
  • Posts: 116
Re: My First Flame Licker
« Reply #2 on: January 05, 2010, 11:28:58 AM »
Nice build!  :ddb: It sounds as if there is a machinist in training watching and approving the finished product.  Congratulations.
Cliff :beer:
Logged
If it isn't broken your not looking hard enough!

Offline jim

  • Sr. Member
  • ****
  • Posts: 441
  • Country: 00
Re: My First Flame Licker
« Reply #3 on: January 05, 2010, 12:17:17 PM »
at last!

thats good news :clap: :clap: :clap: :clap: :clap:

i've really enjoyed the build on this, pleased you got there :thumbup:
Logged
if i'd thought it through, i'd have never tried it

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: My First Flame Licker
« Reply #4 on: January 05, 2010, 01:14:17 PM »
Thanks Chris, Cliff and Jim, I appreciate the support and encouragement you have given.

NIck
Logged
Location: County Durham (North East England)

Offline sorveltaja

  • Hero Member
  • *****
  • Posts: 637
Re: My First Flame Licker
« Reply #5 on: January 05, 2010, 03:53:51 PM »
Nick, that's great work :clap:.
Logged

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: My First Flame Licker
« Reply #6 on: January 07, 2010, 08:19:49 AM »
More videos of the finished, properly running engine!  :ddb: :ddb: :ddb: :ddb:



Logged
Location: County Durham (North East England)

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2023
  • Country: nz
Re: My First Flame Licker
« Reply #7 on: January 07, 2010, 02:20:57 PM »
Great result Nick! :clap: :clap: :clap:
Logged
From the den of The Artful Bodger

Offline chuck foster

  • Sr. Member
  • ****
  • Posts: 334
  • Country: ca
Re: My First Flame Licker
« Reply #8 on: January 07, 2010, 04:41:07 PM »
very nice nick...................and what do you mean "I think I bit off more than I could chew with this one". man you pushed your limit's and still ended up with a running engine  :thumbup:

now on the next project you have to push your limit's a little bit more......................you can do it..


chuck  :wave:
Logged
hitting and missing all the way :)

skype:  aermotor8

former hmem member

Offline NickG

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1890
Re: My First Flame Licker
« Reply #9 on: January 08, 2010, 03:49:27 AM »
Thanks, it just seemed that way at some points I was  :bang:  :bang:. Thinking about an I.C. engine next so will probably push the limits more!

Nick
Logged
Location: County Durham (North East England)
Pages: [1]   Go Up
« previous next »