« previous next »
Pages: [1]   Go Down

Author Topic: 7.5" Gauge Riding Car Trucks  (Read 15009 times)

Offline backyard_cnc

  • Jr. Member
  • **
  • Posts: 23
7.5" Gauge Riding Car Trucks
« on: January 11, 2009, 10:40:47 PM »
Hi All,

Here's my recent shop handy work. A set of Wheel Trucks for use on a 7.5" gauge riding car. Not sure if the car will be a gondola or a flat car but I guess I will decide once I get the wheels and axles turned up on the lathe. The trucks themselves are machined from 1/2" 6061-T6 bar stock. The springs are pocketed into place and were cut from stock and ground flat( not all installed as they are a pain in my fingers to keep putting in and taking out as I work on adding pieces), there are 4 each side and will allow reasonable springiness under a variety of loads from 200~400lbs

 Eventually I plan to build a steam locomotive to pull it but I thought an easy project was in order to get started.............I like easy!

Questions welcome.

Gerald
« Last Edit: January 11, 2009, 10:43:47 PM by backyard_cnc »
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: 7.5" Gauge Riding Car Trucks
« Reply #1 on: January 11, 2009, 11:00:25 PM »
Nice work on those trucks Gerald.

Let me guess, you CNCed those frames?

I'm into 1 1/2" live steam also. I've got castings to build a 1 1/2" scale Shay.

Here's a link you may find interesting: http://www.nelsonslocomotive.com/

Regards,
bernd
Logged
Route of the Black Diamonds

Offline backyard_cnc

  • Jr. Member
  • **
  • Posts: 23
Re: 7.5" Gauge Riding Car Trucks
« Reply #2 on: January 12, 2009, 01:32:24 AM »
CNC OH NO Bernd................I milled those by hand ;-)  yeah right I wish I had that kinda patience and that kinda talent.

Thanks for the link I'll check it out. I've heard from the guys in the local steam club that while SHAY's are very neat they are terribly slow on the track..........being relatively young I have the need for a little more speed!

Gerald
« Last Edit: January 12, 2009, 01:34:18 AM by backyard_cnc »
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: 7.5" Gauge Riding Car Trucks
« Reply #3 on: January 12, 2009, 06:05:58 AM »
Hi Gerald

Nice looking trucks, at 7 1/2" there should be plenty of space to work round, I'll be interested to see how you fix the bracking system. Just spent the day at my club track helping to service and maintain the clubs 5" gauge rolling stock, they're a bit fiddly to work round, nuts and bolts in alsorts of hard to get to places.  :borg:

Have Fun

 :wave:
Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: 7.5" Gauge Riding Car Trucks
« Reply #4 on: January 12, 2009, 10:13:53 AM »
Quote from: backyard_cnc on January 12, 2009, 01:32:24 AM
CNC OH NO Bernd................I milled those by hand ;-)  yeah right I wish I had that kinda patience and that kinda talent.

Ok, I'm a bit confused right now.  :scratch: Are you saying you did CNC those or they were bought and you made the bolster? By the way, it's easy to confuse me. :)

Quote
Thanks for the link I'll check it out. I've heard from the guys in the local steam club that while SHAY's are very neat they are terribly slow on the track..........being relatively young I have the need for a little more speed!

Gerald


Yes they are slow. I've never seen a model version in person. I have ridden on the Cass Railway and know they sound like a jet engine about to take off, when in reality they are only going about 10MPH.

I can understand the need for speed. I was young once too. :D

Bernd
Logged
Route of the Black Diamonds

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: 7.5" Gauge Riding Car Trucks
« Reply #5 on: January 12, 2009, 11:24:20 AM »
Opps,

I posted a reply in the wrong thread, now moved it to correct location..... :bang:

Thanks Bernd, I would have never spotted the blunder without the heads up... :thumbup:
« Last Edit: January 12, 2009, 04:22:14 PM by Darren »
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: 7.5" Gauge Riding Car Trucks
« Reply #6 on: January 12, 2009, 03:49:20 PM »
Ah Darren, I'm a bit confused. I don't see a Roger in this thread or mention of water jet cutting.  :scratch:

Think you may have the wrong thread.

Bernd
Logged
Route of the Black Diamonds

Offline rleete

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 534
  • Country: us
Re: 7.5" Gauge Riding Car Trucks
« Reply #7 on: January 12, 2009, 05:26:24 PM »
Fussy, fussy.  Expecting a reply to be in the same thread as the original subject.  There's just no satisfying you old guys!
Logged
Creating scrap, one part at a time

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: 7.5" Gauge Riding Car Trucks
« Reply #8 on: January 12, 2009, 06:05:54 PM »
 :wack: Owww That hurt. :)
Logged
Route of the Black Diamonds

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5536
  • Country: us
Re: 7.5" Gauge Riding Car Trucks
« Reply #9 on: January 12, 2009, 11:01:12 PM »
Those look nice.

Are you going to run a track at home or are you in a club?

One of my new co-workers is into live steam. Not sure of the scale, but he does belong to a club. Got an invite to go up and take a ride in warmer weather.


Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline backyard_cnc

  • Jr. Member
  • **
  • Posts: 23
Re: 7.5" Gauge Riding Car Trucks
« Reply #10 on: August 30, 2010, 11:58:35 PM »
Well I finally got a small locomotive so maybe I'll get back on this project and build a car over my econo trucks. I haven't been here in ages and I really don't know where the time goes! Actually found my posts on a GOOGLE search for something else Geez!

Anyway now that I have a loco I can start running at the local club track!

cheers all
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: 7.5" Gauge Riding Car Trucks
« Reply #11 on: August 31, 2010, 01:36:04 AM »
Any chance of you posting some more pics of the loco, it looks a neat machine.

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline backyard_cnc

  • Jr. Member
  • **
  • Posts: 23
Re: 7.5" Gauge Riding Car Trucks
« Reply #12 on: September 02, 2010, 05:38:25 PM »
Thanks for the interest Stew,

I hope to get the engine at the track soon and will take some pics and possibly video when I run it. Been really rainy weather for some time and nice weather never seems to correspond with free time for the track
In the meantime heres a shot of it under construction before the cab work was complete.
cheers
Gerald
Logged
Pages: [1]   Go Up
« previous next »