« previous next »
Pages: [1]   Go Down

Author Topic: Headstock gear lub.  (Read 5537 times)

Offline Shepherduke

  • Jr. Member
  • **
  • Posts: 35
Headstock gear lub.
« on: December 18, 2009, 02:46:55 PM »
 What lub is needed for non-metallic  gears in a mini lathe headstock?
 Will silicon grease do the job?  Thanks in advance.
Logged

Offline Richard48

  • Jr. Member
  • **
  • Posts: 7
Re: Headstock gear lub.
« Reply #1 on: December 18, 2009, 03:09:21 PM »
I have found that it is a wast of time to put any thing on the gears. It's not going to stay there.
I used some on my mini-lathe and the next time I had the head of all of the lub was on the bed and not on the gears.

Richard
Logged
Richard, Northern NY

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Headstock gear lub.
« Reply #2 on: December 19, 2009, 10:15:04 AM »
If they're some kind of plastic I'd sy none at all. It's slippery enough without lube.

Besides there isn't much friction on two spur gears.

Bernd
Logged
Route of the Black Diamonds

Offline Shepherduke

  • Jr. Member
  • **
  • Posts: 35
Re: Headstock gear lub.
« Reply #3 on: December 19, 2009, 11:30:22 AM »
Thanks
Logged
Pages: [1]   Go Up
« previous next »