The Shop > Our Shop

gingerneer's shed

(1/3) > >>

gingerneer:
Hi guys, just some photos of my workshop.

First up some photos of my Zyto lathe.





Now just a shot from the door way, you would not belive that i have had a tidy up..... At least i can get to the other end of the shed now




The last weekend saw me sorting through all the cardboard boxes and ice cream cartens, they have made way for these clear boxes. It was a reall eye opener as a found "stuff" that i had stashed away and forgotten about. Before all this took up double the area its in now.




A close up of the fixings box, this shows the metric tray. Just in the last few days after tidying this lot up i have found it less stress full than trying to hunt for a bolt or nut as i use to!



The Dewinton

bogstandard:
Ginger,

Nice shop, compact and bijou as they say.

Nice Zyto as well, based around the Myford ML2 series I think, but with an extra casting foot under the tailstock. The first thing I did with mine was to modify the saddle crank. I just couldn't get used to the non instinctive movement, turning the handle away from the chuck to make it go closer, I had a few very close encounters with that. I stuck an extra gear on, that not only changed direction, but also geared it down some, so that finer movements could be made.


John

sbwhart:
Hi Ginger

Nice compact shop just how I like them, thats a fair chunk of boiler copper tube you have there what are you planning to make with it ?.

Cheers

Stew

jim:
thats a nice workshop you've got there :thumbup:

that window wouldn't last long with me!!

John Hill:
Hi Ginger

Nice set up and I am looking forward to see that De Winton steaming!

John
The Artful Bodger

Navigation

[0] Message Index

[#] Next page