Gallery, Projects and General > Project Logs
4" Vertex Rotary Table CNC conversion
<< < (14/16) > >>
John Stevenson:
Thanks, next question where is the case from please ?
johnstij:
John s.

The one I used was from out of my loft !!

Its from RS  external Dims are 170mm x 118mm x 55mm, diecast aluminuim with lid.

Every thing just fits in. I cut an aperture in the back for the stepper driver to be fitted from the rear with the heat sink outside the box. When the keypad is fixed in its correct position the bottom edge is approx 6mm from the edge of the box.
John Stevenson:

--- Quote from: johnstij on February 18, 2012, 09:16:11 AM ---John s.

The one I used was from out of my loft !!



--- End quote ---

I have a workshop like that.  :lol:

Thanks.
kwackers:

--- Quote from: johnstij on February 18, 2012, 07:12:09 AM ---John s.


It was  off ebay from Hong Kong (no surprise there !!)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250990148810

--- End quote ---

How do you find that driver?

Looks ideal for this sort of use.
z3t4:
Echoing the above: nice find!
Navigation
Message Index
Next page
Previous page

Go to full version