Gallery, Projects and General > Project Logs |
4" Vertex Rotary Table CNC conversion |
<< < (12/16) > >> |
raynerd:
Hi Andy, that interesting. I`m not going to say I`m going to try it because I have 3 boxes of 50x sheets of printer transparency which I`m using but sounds a great method if you can`t get hold of transparency sheets which seem quite expensive these days!! Great method!! |
Chuck in E. TN:
Craynerd, is that Luk's post with copper.pdf and silk.pdf? Chuck in E. TN |
raynerd:
Hi Chuck, Sorry for the late reply!!! Yes, Lucas: http://www.cnczone.com/forums/893705-post346.html It is much easier to etch and much more forgiving. That being said, I have now improved my method of etching and can do Steve`s original pcb which requires much less time to etch! Here is Lucas pcb being etching: After developing: After etching: |
sparky961:
Looks like you're getting the hang of that etching, Chris! |
raynerd:
Cheers Sparky, yes I`m getting there for sure! I just wanted to show people the other pcb as much as my etching skills lol, or lack of them!! |
Navigation |
Message Index |
Next page |
Previous page |