« previous next »
Pages: [1]   Go Down

Author Topic: Cutting gears using a dividing head  (Read 8871 times)

bogstandard

  • Guest
Cutting gears using a dividing head
« on: November 03, 2009, 11:04:50 AM »
A few people are asking questions about gear cutting and dividing heads.

I found this vid showing how a chap did it, and it explains the operation very well.






Bogs
Logged

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Cutting gears using a dividing head
« Reply #1 on: November 03, 2009, 11:39:47 AM »
Thanks for that John,

Seems like I may have found a use for the catch plate and dog that fits my RT now ...  :)

What I need to study up on is diametrical pitch and blank diameters ....  :coffee:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: Cutting gears using a dividing head
« Reply #2 on: November 03, 2009, 02:38:04 PM »
Bog's

Nice find. He forgot to mention how to line up the cutter with the blank on the mill, but other than that nice vid the guy made. Simple and straight forward.

Bernd
Logged
Route of the Black Diamonds

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2023
  • Country: nz
Re: Cutting gears using a dividing head
« Reply #3 on: November 03, 2009, 03:02:11 PM »
Thanks Bogs, that is a great video but my eyeballs glazed over as soon as he started talking in those strange archaic? measurement terms. :doh:
Logged
From the den of The Artful Bodger

Offline chuck foster

  • Sr. Member
  • ****
  • Posts: 334
  • Country: ca
Re: Cutting gears using a dividing head
« Reply #4 on: November 04, 2009, 11:01:16 AM »
good video bogs  :D

chuck  :wave:
Logged
hitting and missing all the way :)

skype:  aermotor8

former hmem member

Offline crabsign69

  • Full Member
  • ***
  • Posts: 165
Re: Cutting gears using a dividing head
« Reply #5 on: November 04, 2009, 01:05:32 PM »
great vidio i enjoyed that very much thank u :beer:
Logged

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Cutting gears using a dividing head
« Reply #6 on: November 04, 2009, 02:57:24 PM »
Nice one John  :thumbup:

CC
Logged
Pages: [1]   Go Up
« previous next »