Hello,
My name is Burton, I am an amature machinist, I have a 7 x 12 lathe and a 9 x 22 shortly on its way.
I have a Grizzly mini mill converted to CNC, I am into model engine building, gas or steam, I am big into RC anything, I have 1/32 scale up to 1/4 scale.
I am currently working on a couple of engines, A four cycle 7/16 stroke and bore. A 5 cylinder radial. Modifying a 23cc 2 cycle for a 1/5 scale 2wd buggy.
I am into turbine engines, I have built three, one is turbocharger based (Garrett T4) for a 1/4 scale tractor puller. The other two have turned out to be better garage heaters than engines.
A lot of my RC vehicles are custom made on the CNC mill.
I have a few helis and planes, I am better at building them than flying them.
I make most of my tooling due to cost and the good feeling of making something useful.
The majority of my time right now goes into my 5 month old daughter and everything that goes along with her.
As the name says -I modify everything-
-B-