So I ordered one length of 9.00 mm steel bar for a job ?
This arrived today.

90mm x 6 metres or 3-1/2" x 20 feet for the metrically impaired.
Joking apart it
IS what I ordered but because I knew the weight I asked for it to be cut at 2 x 4 foots and 2 x 6 foots.
I only wanted the two x 4 foots, the rest is spare but now paid for.
Truck rolls up at 4:00pm with an uncut bar, can't send it back as I have no time left to make these to a deadline before the show on Friday, well Thursday setup actually.
Poor old Forky was really struggling and it's too long to get onto the saw with where it's positioned, so it's a tossup between the Armstong saw or the angle grinder, angle grinder won.

Knocked off at 6:15 tonight as I wanted to get the press out the Donald and assembled.
Just got the two 4 foot shorts on the saw and converted to eight 12" lengths for when I finished.
Did the 3 cuts on 1 - 1/2 nine inch cut off disks which I thought was good, expected to wear more out than that.
.