MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Check out the latest in the Gallery:
Gallery
Home
Help
Search
Login
Register
MadModder
»
The Breakroom
»
The Water Cooler
»
Chester mini lathe spares.
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Chester mini lathe spares. (Read 5037 times)
Gerhard Olivier
Sr. Member
Posts: 314
Chester mini lathe spares.
«
on:
October 06, 2009, 04:22:44 AM »
I have been collecting part to do a build of a mini lathe-all the parts is of a Chester mini lathe Some has some mods already done and others are as I got them.
I have the bed - headstock with taper bearings and a metal master (big) gear - tailstock -motor (dont know if it works)also apron with Ali gear cover and sadlle. Pan and back splash gaurd also.
My wife insists I put it on Ebay because I got the bigger lathe as a project now-#If anybody is interested I would rather it go to a Madmodder as well.
Any offers part or all of it.
Gerhard
Logged
Guernsey
Channel Islands
Darren
Madmodder Committee
Hero Member
Posts: 3795
N/Wales
Re: Chester mini lathe spares.
«
Reply #1 on:
October 06, 2009, 05:21:31 AM »
I wouldn't mind the headstock, do you have the spindle with it? what's a metal master?
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
matnewsholme
Jr. Member
Posts: 39
Re: Chester mini lathe spares.
«
Reply #2 on:
October 06, 2009, 08:36:16 AM »
darren
I'd guess the metal master bit is in reference to the two gears inside the headstock which are plastic from the factory and break. you can get aftermarket metal replacement ones.
matt
Logged
Darren
Madmodder Committee
Hero Member
Posts: 3795
N/Wales
Re: Chester mini lathe spares.
«
Reply #3 on:
October 06, 2009, 08:43:37 AM »
Ah, gotcha .....
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
Gerhard Olivier
Sr. Member
Posts: 314
Re: Chester mini lathe spares.
«
Reply #4 on:
October 06, 2009, 09:17:04 AM »
Sorry yes darren the spindle is in the headstock and the big gear has been replaced with metal one the smaller is still plastic- ill put up a picture if u want.
Gerhard
Logged
Guernsey
Channel Islands
sbwhart
Global Moderator
Hero Member
Posts: 3530
Country:
Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Chester mini lathe spares.
«
Reply #5 on:
October 06, 2009, 11:41:14 AM »
If the motor works it may do for my tool post grinder
Stew
Logged
A little bit of clearance never got in the road
Location:- Crewe Cheshire
Darren
Madmodder Committee
Hero Member
Posts: 3795
N/Wales
Re: Chester mini lathe spares.
«
Reply #6 on:
October 06, 2009, 12:34:23 PM »
Stew, if it's a mini lathe motor it'll be 180VDC, you would need a power supply and all that entails.
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
Gerhard Olivier
Sr. Member
Posts: 314
Re: Chester mini lathe spares.
«
Reply #7 on:
October 06, 2009, 12:51:01 PM »
Stew - motor and all the electronics i have for it is yours -I have never been able to test any of it.
There is a small circuit bord that looks like a power suply and a bigger one that looks like speed controll and diretion.
Gerhard
Logged
Guernsey
Channel Islands
Darren
Madmodder Committee
Hero Member
Posts: 3795
N/Wales
Re: Chester mini lathe spares.
«
Reply #8 on:
October 06, 2009, 01:34:50 PM »
Hi Gerhard, I have sent you a PM ...
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
The Breakroom
»
The Water Cooler
»
Chester mini lathe spares.