I bet you thought I'd given up on this, you should know me better than that.
Any way wasn't too happy with the base plate tried to repoistion the motor on it and made a right cock up of it:- it now had more holes than a piece of Swiss cheese.
So re made it and positioned the rotar so that it drove the spindle clock wise.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2596.jpg)
Now to sort out mounting the wheels.
I made some blank quils with a female fixing.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2598.jpg)
To mount the quils the shaft required turning down for a male fixing
To do this I decided to try my ER32 collets on the lathe, I had to turn and drill the adaptor plate so that it would fit the lathe and my RT, for the ER32 mount instead of fitting it on a spigot I just fixed it to a flat face with the three fixing screws, I just nipped up the three screws clock the bore up dead true tighten the screws clocked the bore corrected the error tightend the screws some more so that it was realy tight clock the bore again spot on.
Took the shaft out of the spindle and mounted it in the ER32 clocked it up it was running dead true
Gently turned it down so that the concentricity wouldn't be spoilt.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2599.jpg)
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2602.jpg)
I can mount external wheels on this.
Then mounted one of the blank quils to it and turned this down to a Dremel mounting.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2604.jpg)
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2607.jpg)
Her it is with the chuck and point in place.
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2600.jpg)
![](http://i431.photobucket.com/albums/qq32/sbwhart/Tool%20Post%20Grinder/100_2605.jpg)
Thats all for now next job put some spanner flats on the shafts, sort out the dead man switch and thats just about it.
Stew