« previous next »
Pages: [1]   Go Down

Author Topic: Carbide tip code??  (Read 5071 times)

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Carbide tip code??
« on: September 24, 2009, 12:23:04 PM »
Does anybody know where I can get + code for a big carbide cutting tip.  Would prefer a triangle about 3/4".
Logged
Guernsey
Channel Islands

Offline jim

  • Sr. Member
  • ****
  • Posts: 441
  • Country: 00
Re: Carbide tip code??
« Reply #1 on: September 24, 2009, 12:45:06 PM »
whats it for?

if you've got the tool its for, you can work out the code for the tip from the code on the tool :thumbup:

if you know the size you need, ie, length, widith, tip rad, hole in middle or not, someone is sure to have the answer :thumbup:
Logged
if i'd thought it through, i'd have never tried it

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Carbide tip code??
« Reply #2 on: September 24, 2009, 12:52:52 PM »
Hi sorry should have said

I want to make a ball turner for woodwork lathe and will make the holder so detail not important.  Just needs to be big enough to have a cutting edge of at least 1/2 inch. Triangle / diamond shape would be good.  Possibly only need one as wood is not going to blunt it anytime soon.

Gerhard
Logged
Guernsey
Channel Islands

Offline NorthOf40

  • Jr. Member
  • **
  • Posts: 44
Re: Carbide tip code??
« Reply #3 on: September 24, 2009, 01:02:10 PM »
Logged
Jim
Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it. – Mark Twain

bogstandard

  • Guest
Re: Carbide tip code??
« Reply #4 on: September 24, 2009, 01:05:05 PM »
Gerhard,

PM me your adress and I will pop a couple in the post for you.


John
Logged

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Carbide tip code??
« Reply #5 on: September 28, 2009, 03:14:31 PM »
Bogs Thanks a bunch the tips you sent got here.  They are spot on.

Just need a few more bits that the scrap bin can't help with and then to get started.

Gerhard
Logged
Guernsey
Channel Islands

bogstandard

  • Guest
Re: Carbide tip code??
« Reply #6 on: September 28, 2009, 03:41:15 PM »
Glad I could help with your project Gerhard.

I have a few more of the big dumpy ones if you go that way.


Bogs
Logged
Pages: [1]   Go Up
« previous next »