The Shop > Metal Stuff |
Round Copper Bar |
<< < (3/4) > >> |
Bluechip:
With all due respect chaps, not very inspiring, :( I think you have confirmed my conclusion that it has virtually no use for me. I have no plans to copper plate owt, and I have two of the 'three bladed, springy, whizzy-roundy, slipstoney thingys' for cylinder honing. I might just have a go at Bogs suggestion, I have a ISCRA (?) parting tool that I need to sort out. If it does copper, it'll do anything as Bogs says. Then, off to the Scrappy with the debris :D Dave BC |
Stilldrillin:
--- Quote from: Bluechip on September 13, 2009, 04:01:36 AM --- Then, off to the Scrappy with the debris :D --- End quote --- Please note Dave....... Not for me, thanks! :thumbup: Dave SD/ D. |
Bluechip:
No Dave SD .. a proper Scrappy .. with whom I am trying to ingratiate myself in the hope of er.. Pickings to Come ?? as it were .. Dave BC |
NickG:
Shame you don't know anyone making superheaters! :lol: All I had to do really was saw, file and drill. I do seem to remember turning some though! You just need your tool the right shape, a really high rake angle, sort of curved, hook type shape usually works best! Any way you can use it to your advantage though makes sense! :thumbup: Nick |
Bluechip:
Nick Aaargh ! Saw,file , drill ?? Not with arthritis I ain't. Anyway, gone to the big smelter in the sky now. Together with a shed load ( actually, not literally), of leccy motors, trannies, redundant BSW hex bar, bits of ally, bsw/bsf bolts nuts, sundry other crap, now have a nearly freehold garage. ( was 164 kg total, crafty buggers weigh it). Damn near knacked me and the car getting it there, fortunately a young warrior unloaded the stuff while me and the geezer who runs the place swapped old Velocette yarns over a coffee an' Jaffa Cakes. On the negative side, could not resist some 4" & 3" and lesser dias. P-Bronze off cuts :( as a swappy thing. I wanted nowt for the scrap, so I was offered a little shufti in the Holy of Holies and scrounged about 10kg of the Phossy. (It's a shiny flywheel thing). Some old codgers NEVER learn, well chuffed tho. :beer: Dave BC |
Navigation |
Message Index |
Next page |
Previous page |