« previous next »
Pages: [1]   Go Down

Author Topic: Hello from sunny Hereford  (Read 8039 times)

Offline 28ten

  • Full Member
  • ***
  • Posts: 107
Hello from sunny Hereford
« on: July 29, 2009, 03:34:38 PM »
First post and I am lying, it is still chucking it down here :bang:
What do I like to make? trains usually, but that's not why I am here. I own a C3 lathe (and hopefully a mill in the not too distant future) and after seeing bogstandards work on you tube, I thought I would join before I start to improve the machine, I shall start a thread on my experiences  :D
Logged
If it ain't broke, i'll fix it until it is.

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: Hello from sunny Hereford
« Reply #1 on: July 29, 2009, 03:47:51 PM »
Hi there 28ten and welcome to the collective  :borg:

Dont forget to take some photos of what you've done / are going to do, cause  :worthless:


We like pics here  :mmr:


Please feel free to share whatever experiences you have.


I have the smaller brother of the C3, the C2 but I wish I'd got a slightly bigger and more rigid lathe like the C4.



Tim
Logged
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Hello from sunny Hereford
« Reply #2 on: July 29, 2009, 04:03:56 PM »
Welcome aboard  :beer:

CC
Logged

Offline Andy

  • Jr. Member
  • **
  • Posts: 55
Re: Hello from sunny Hereford
« Reply #3 on: July 29, 2009, 04:30:17 PM »
Welcome 28ten. Good decision, joining this board.  :mmr:
I've got a C3 as well, done most of the easy mods now.
Logged
From probably the smallest, dampest and most untidy workshop in Bradford, West Yorks, England, if not the world..

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5536
  • Country: us
Re: Hello from sunny Hereford
« Reply #4 on: July 29, 2009, 04:31:53 PM »
Welcome to the collective :borg:

I have the c2... wish I would have gotten the c3 or c4. Oh well! You should find plenty of info here about upgrading those machines (the mills too)

Lets see some pictures of the trains!

Eric
Logged
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Hello from sunny Hereford
« Reply #5 on: July 29, 2009, 05:05:09 PM »
Welcome aboard the cube 28ten  :borg:

Is it steam trains your into ?.

Just join in the fun ask ? answer ? and catch  :proj:  and do a bit of the old leg pulling.

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline 28ten

  • Full Member
  • ***
  • Posts: 107
Re: Hello from sunny Hereford
« Reply #6 on: July 29, 2009, 06:04:03 PM »
Quote from: sbwhart on July 29, 2009, 05:05:09 PM
Welcome aboard the cube 28ten  :borg:

Is it steam trains your into ?.

Just join in the fun ask ? answer ? and catch  :proj:  and do a bit of the old leg pulling.

Cheers

Stew
Yes indeed, small ones though hopefully this image will work
Logged
If it ain't broke, i'll fix it until it is.

Offline 28ten

  • Full Member
  • ***
  • Posts: 107
Re: Hello from sunny Hereford
« Reply #7 on: July 29, 2009, 06:05:48 PM »
The image is a little small but it seems to work so here is the lathe, pretty boring and un modded. I have added a small halogen light and a few more goodies since this was taken
« Last Edit: July 29, 2009, 06:07:25 PM by 28ten »
Logged
If it ain't broke, i'll fix it until it is.

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Hello from sunny Hereford
« Reply #8 on: July 30, 2009, 01:24:51 AM »
Hi 28ten

Nice looking Loco, what gauge is it ? , and what is it a model off looks like a pre 1900 design a Great Western maybe.

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Hello from sunny Hereford
« Reply #9 on: July 30, 2009, 03:32:26 AM »
Very nicely detailed 28ten, looks like many an hour expired during the making of..... :clap:

Welcome to the forum, be careful, or you'll get distracted...... :thumbup:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Hello from sunny Hereford
« Reply #10 on: July 30, 2009, 12:33:45 PM »
Hello 28ten & welcome!  :wave:

Join in. Show lots of pics....

Enjoy! :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline 28ten

  • Full Member
  • ***
  • Posts: 107
Re: Hello from sunny Hereford
« Reply #11 on: July 30, 2009, 02:08:42 PM »
Quote from: sbwhart on July 30, 2009, 01:24:51 AM
Hi 28ten

Nice looking Loco, what gauge is it ? , and what is it a model off looks like a pre 1900 design a Great Western maybe.

Cheers

Stew
It is indeed Great western built in the 30's though. I have added one more picture of a horsebox. the scale is 7mm to the ft which is about double the size of Hornby. the sheet work is mainly brass on Nickel silver.
I would love to be making bigger stuff but I don't have the space/time/money  :(
I used to have access to an ML7 which was superb, I am happy with mini lathe in size terms but as we all know it needs some work to get the the sort of accuracy needed for small parts.
Logged
If it ain't broke, i'll fix it until it is.

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Hello from sunny Hereford
« Reply #12 on: September 08, 2009, 12:05:20 PM »
Ok.... So I'm a little behind in the welcoming messages!!!!!


You have posted 73 times and I'm only just saying hi!?  I might have even read or replied to some of them? .... My brain just ain't here at the mo!

I've been very busy honest  :) 



I'm sure your name is out there somewhere by now? But for now.... Hi 28ten  :) 




Ralph.
Logged
I know what I know and need to know more!!!
Pages: [1]   Go Up
« previous next »