Gallery, Projects and General > Gallery
My Attempt
foozer:
--- Quote from: Bluechip on July 20, 2009, 09:43:19 AM ---
--- Quote from: foozer on July 19, 2009, 06:32:14 PM ---
--- Quote from: Bluechip on July 19, 2009, 04:48:56 PM ---
Robert: Pics of yours then? I've bared my soul ...
--- End quote ---
Dood it just for you :) here
--- End quote ---
Foozer, you do your engine an injustice. That is a sweet little engine. Enchantingly exuberant !. I must treat mine to a flywheel shortly.
Dave
--- End quote ---
That's funny. Know how I drilled the holes in the flywheel? You sitting down?
Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley.
--- Quote ---I'm retired. I really resent it now when I have to go to appointments
--- End quote ---
UPS is my friend now, if only burgers and fries were delivered. . .
rleete:
--- Quote from: foozer on July 20, 2009, 12:52:08 PM ---That's funny. Know how I drilled the holes in the flywheel? You sitting down?
Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley.
--- End quote ---
That's innovative thinking!
DeereGuy:
The important thing is you made it. Nice job!
Bernd:
--- Quote from: foozer on July 20, 2009, 12:52:08 PM ---That's funny. Know how I drilled the holes in the flywheel? You sitting down?
Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley.
--- End quote ---
Another saw blade to use is a band saw blade. You can bbend those around a piece of wood and make an indexing device.
Bernd
Stilldrillin:
Dave!
Sorry Mate....... Only just seen this! :doh:
Very nicely done! :clap:
Re. bores/ boring.
I`ve got lots of reamers which used to produce mirror finish holes from 10mm to 20mm. Let me know what size will be of use, next time.... :thumbup:
David D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version