« previous next »
Pages: [1]   Go Down

Author Topic: Fly cutter shape.  (Read 7603 times)

Offline Nickon51

  • Newbie
  • *
  • Posts: 3
Fly cutter shape.
« on: July 15, 2009, 11:37:42 PM »
Does anyone know how to correctly sharpen a fly cutter. I have an X2 mill plus a nice looking flycutting holder, however the cuts that I am getting are a bit rough. Not nice at all. Here is the one that I have made. Its 5/16 sq HSS

« Last Edit: July 15, 2009, 11:40:22 PM by Nickon51 »
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Fly cutter shape.
« Reply #1 on: July 16, 2009, 01:13:53 AM »
Hi

If you follow this link http://madmodder.net/index.php?topic=850.0 ther's a very good thread by John Bogstandard on flycutter shape.   :mmr:

Hope this helps

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire
Pages: [1]   Go Up
« previous next »