Yes,have to agree,when i took a 2nd look at the m12 rod it was bending a bit to much to feel safe but not able to find a larger diameter rod,i tightened the nuts some extra,removing a plank from the cieling(floor from above)seamed a bit to much work,they're these planks that klick ineachother,I also shoved a piece of wood between the wooden cieling and the rod so it couldnt go anymore further north,and placed an extra stud as close as posible to the beam under the rods....the M14 rod didnt bend to much to worry.
Worked like a charm

,got it up on the supports,now i can begin to reassemble(might be spelled wrong

) the thing and start cleaning the packing grease from hell

This is gonne be a long night,you know that urge when you start cleaning a bit,you cant stop before the whole thing is shining...
Probably will need a truck of

Thx for the helping hints all of you guys,greatly apreciate it,i'll get another pic on when my baby is up and running

Ps,John...shouldnt you go check if you lathe and chain hoist are still there?...

Danny