The Shop > Electronics & IC Programing
Pi PICO DRO/Quill-Knee combiner
BillTodd:
Aha!
fixed the font error by editing the font file . No more bouncing numbers .
AdeV:
Very nice!
If you can implement the sliding woodworker's scale ( :lol: the inch fractional one), that would be the icing on the cake. But it looks like you already have a really nice functional DRO.
BillTodd:
That's today's project :lol:
philf:
--- Quote from: AdeV on January 31, 2024, 04:55:33 AM ---If you can implement the sliding woodworker's scale ( :lol: the inch fractional one), that would be the icing on the cake.......
--- End quote ---
Funnily enough I was thinking the same. I find it much easier to move to a value on a dial rather than via the DRO. (Not that I'd want fractions!)
BillTodd:
It's almost working . a couple of quirks to iron out but the PICO seems fast enough.
Not the greatest video , but my camera battery went flat and i could not retake. The ghosting is a problem with the OLED display , I suspect the driver chip setting requires tuning (there are a few pre-charge and current settings to adjust) anyone have any experience?
Shown are 64ths but any divisor can be used (works nicely at 1/16")
&feature=youtu.be
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version