| Gallery, Projects and General > Member Videos |
| Hit & Miss Engine - Help Needed |
| (1/2) > >> |
| Jim Dobson:
G'day all, I have taken more than a few days to build the base for this Enjomor 6cc Hit & Miss Engine. Really happy how it turned out. I can't get a spark from the plug. Has anyone got any thoughts on what to check out to see why I'm not getting a spark? I've pointed out in the video a few things where I'm stuck. |
| SwarfnStuff:
Looks Good Jim, My first thought is check the reed switch wires. You say three but only two are used so can you check the two connected wires actually make a circuit when the contacts close then no circuit when they break? Or reversed? First place I would check anyway. Good luck trouble shooting the problem and other more knowledgeable that I will chip in with more help I'm sure. John B |
| Jim Dobson:
Thanks John appreciated mate. I will try that. Hopefully the process of elimination eventually gets it running. Have a great evening and thanks again. |
| tom osselton:
I’ve no idea but to follow the power and see where it stops, although it would be a hoot if it was the on / off badge needs flipped 180*. [ You are not allowed to view attachments ] Probably the best person to talk to would be Doc he’s done a few of those and he’s a forum member too. |
| Jim Dobson:
--- Quote from: tom osselton on July 25, 2023, 04:20:05 PM ---I’ve no idea but to follow the power and see where it stops, although it would be a hoot if it was the on / off badge needs flipped 180*. [ You are not allowed to view attachments ] Probably the best person to talk to would be Doc he’s done a few of those and he’s a forum member too. --- End quote --- G'day Tom, I've checked the on off switch :) Thanks for the reply, appreciated. |
| Navigation |
| Message Index |
| Next page |