| Gallery, Projects and General > Member Videos |
| Schaublin 125-CNC retrofit to LinuxCNC and Mesa cards. |
| << < (4/16) > >> |
| BillTodd:
I would not take that spindle apart ! I have replaced lathe spindle bearings on simpler lathe spindles - as you say - major pucker factor - even simple lathes have very expensive bearings ! I'd either lubricate in place or leave be. The bearings and grease on my HLV-H are now 55 years old and still OK, I have the urge to pull them and lubricate too. |
| mattinker:
Mark, I definitely wouldn't take it apart, a long soak in solvent, I'd then try to "flush" it with diesel with your syringe before re-rinsing in solvent blow dry and grease! "If it aint broke" ............................ Cheers, Matthew |
| RotarySMP:
Thanks. Yep, that is what I did... |
| mattinker:
So i saw! Gave you a like!! If by chance you find yourself in Paris, (Le Bourget air show?) look me up! Cheers, Matthew |
| RotarySMP:
Thanks. I went to the Paris air show once. Must have been about 1999 or so. Very cool. Mark |
| Navigation |
| Message Index |
| Next page |
| Previous page |